全文検索:

01 Linux ipsec Server

13 ヒット, 最終更新: 7年前

sctl.conf ==== 一番下に下記を追加 <code|/etc/sysctl.conf> net.core.xfrm_larval_drop = 1 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.eth0.send_redirects = 0 net.ipv4.conf.lo.send_redir

03 Strongswan IKEv2 with PSK

5 ヒット, 最終更新: 3年前

load </code> ===== 3.forward ===== sysctl -w net.ipv4.ip_forward=1 ===== 4.ipsec.conf(tokyo) ===... modp2048 conn osaka leftid=@tokyo leftsubnet=10.10.0.0/16 rightid=@osaka right=200.200.0.200 rightsubnet=172.16.0.0/24 auto=start </code> ===== 5.ips... modp2048 conn tokyo leftid=@osaka leftsubnet=172.16.0.0/24 rightid=@tokyo right=100.10

02 Linux IPsec Client

3 ヒット, 最終更新: 7年前

R_UP> mtu 65536 qdisc noqueue state UNKNOWN inet 127.0.0.1/8 scope host lo 2: eth0: <BROADCAST,MUL... mtu 1500 qdisc pfifo_fast state UP qlen 1000 inet XXX.XXX.XXX.XXX/24 brd 211.125.67.255 scope globa... u 1410 qdisc pfifo_fast state UNKNOWN qlen 3 inet 192.168.1.128 peer 192.168.1.99/32 scope global p

04 Strongswan IKEv2 EAP

2 ヒット, 最終更新: 3年前

6-sha256-modp2048 conn IPSec-IKEv2-EAP leftsubnet=0.0.0.0/0 leftid=vpn.hogehoge.com left=%a... -reload </code> ==== 5.forward ==== sysctl -w net.ipv4.ip_forward=1 ===== Windows側 ===== ==== V

05 KVM Multi-Queue

2 ヒット, 最終更新: 3年前

_optimization_guide-networking-multi-queue_virtio-net]] ===== xml修正 ===== <color #ed1c24><driver nam... : 0 Combined: 2 </code> <code> # ls /sys/class/net/eth0/queues/ rx-0 rx-1 tx-0 tx-1 </code> ====

06 WireGuard

1 ヒット, 最終更新: 5カ月前

oqueue state UNKNOWN group default qlen 1000 inet 10.0.0.1/24 scope global wg0 valid_lft for