====== 37 MegaCliのSmart情報 ====== ===== MegaCliでDevice ID確認 ===== # /opt/MegaRAID/MegaCli/MegaCli64 -PDlist -aAll Adapter #0 Enclosure Device ID: 64 Slot Number: 0 Drive's position: DiskGroup: 0, Span: 0, Arm: 0 Enclosure position: N/A Device Id: 2 WWN: 5000c5007b397b66 Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 465.761 GB [0x3a386030 Sectors] Non Coerced Size: 465.261 GB [0x3a286030 Sectors] Coerced Size: 464.729 GB [0x3a175800 Sectors] Sector Size: 0 Logical Sector Size: 0 Physical Sector Size: 0 Firmware state: Online, Spun Up Commissioned Spare : No Emergency Spare : No Device Firmware Level: CC03 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x4433221100000000 Connected Port Number: 0(path0) Inquiry Data: 9XF3MMBMST9500620NS CC03 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive: Not Certified Drive Temperature :26C (78.80 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 64 Slot Number: 1 Drive's position: DiskGroup: 0, Span: 0, Arm: 1 Enclosure position: N/A Device Id: 3 WWN: 5000c5007b39948b Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 465.761 GB [0x3a386030 Sectors] Non Coerced Size: 465.261 GB [0x3a286030 Sectors] Coerced Size: 464.729 GB [0x3a175800 Sectors] Sector Size: 0 Logical Sector Size: 0 Physical Sector Size: 0 Firmware state: Online, Spun Up Commissioned Spare : No Emergency Spare : No Device Firmware Level: CC03 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x4433221101000000 Connected Port Number: 1(path0) Inquiry Data: 9XF3N5RZST9500620NS CC03 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive: Not Certified Drive Temperature :27C (80.60 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Exit Code: 0x00 ===== smartctlで情報取得 ===== smartctl -a -d sat+megaraid,[Device ID] /dev/sda Device ID: 2のSmart情報を取得する場合は下記 # smartctl -a -d sat+megaraid,2 /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.0+2] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: ST9500620NS Serial Number: 9XF3MMBM LU WWN Device Id: 5 000c50 07b397b66 Firmware Version: CC03 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Tue Dec 11 13:16:37 2018 JST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 625) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 96) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 076 063 044 Pre-fail Always - 49880690 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 7 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 621005461 9 Power_On_Hours 0x0032 067 067 000 Old_age Always - 29525 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 7 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 074 062 045 Old_age Always - 26 (Min/Max 26/28) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 243 194 Temperature_Celsius 0x0022 026 040 000 Old_age Always - 26 (0 21 0 0) 195 Hardware_ECC_Recovered 0x001a 112 099 000 Old_age Always - 49880690 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. {{tag>megacli smartctl}}