全文検索:

Vyatta OpenVPN Server/Client @05_network:04_vyatta

9 ヒット, 最終更新: 12年前

Client ====== ===== 環境 ===== |Global側|eth0|10.10.100.1| |Local側|eth1|192.168.1.1| |仮想LAN|vtun0|172.16.100.1| +----------+ ... et interfaces openvpn vtun0 server subnet '172.16.100.0/24' # set interfaces openvpn vtun0 server topol... # set interfaces openvpn vtun0 remote-host '10.10.100.1' # set interfaces openvpn vtun0 tls ca-cert-fil

Vyatta Openvpn @05_network:04_vyatta

8 ヒット, 最終更新: 12年前

vyatta-A|10.10.10.246/24|192.168.10.246/24|172.16.100.246| |vyatta-B|10.10.20.75/24|192.168.20.75/24|172.16.100.75| <code> +----------+ ... set interfaces openvpn vtun0 local-address 172.16.100.246 set interfaces openvpn vtun0 remote-address 172.16.100.75 set interfaces openvpn vtun0 shared-secret-key

Summit Command @05_network:02_summit

5 ヒット, 最終更新: 12年前

TP Diagnostic: passed Aggregate B/W: Configured 100 % Random Early Drop: Disabled Admin state: Enab... speed sensing Link state: Active. Full-duplex 100 Mbps. Link counter: Up 3 time(s), Down 2 times(s... s [<portlist> | all | mgmt] auto off {speed [10 | 100 |1000]} duplex [half | full] </code> <code console> configure ports 1 auto off duplex full speed 10

Vyatta Backup/Reestore @05_network:04_vyatta

4 ヒット, 最終更新: 12年前

fig set interfaces ethernet eth0 address '10.10.100.1/24' set interfaces ethernet eth0 duplex 'auto... speed '9600' set system gateway-address '10.10.100.10' set system host-name 'vyatta01.optcube.com'... tta level 'admin' set system name-server '10.10.100.2' set system name-server '10.10.100.5' set system ntp server '0.vyatta.pool.ntp.org' set system

Vyatta - L2TP(IPSec) @05_network:04_vyatta

4 ヒット, 最終更新: 12年前

は十分な効力を発揮します。 ===== 環境 ===== |Global側|eth0|10.10.100.1| |Local側|eth1|192.168.1.1| +----------+ ... dns-servers { server-1 10.10.100.5 server-2 10.10.100.2 } ipsec-settings { auth... } } outside-address 10.10.100.1 } } } </code> ===== 最後にNatの設定を忘れずに

Vyatta - Nat @05_network:04_vyatta

4 ヒット, 最終更新: 12年前

LAN内のサーバにアクセスさせたい場合など。 この例はvyattaのglobal ip10.10.100.1(port 10022) 番宛をLAN内の192.168.122.15(port 22) にNATする。 <code console> # set nat destination rule 10 inb... nat destination rule 10 destination address 10.10.100.1 # set nat destination rule 10 protocol tcp # set nat destination rule 10 destination port 10022 # set nat destination rule 10 translation addre

Vyatta - インストール @05_network:04_vyatta

3 ヒット, 最終更新: 12年前

ole> # set interfaces ethernet eth0 address 10.10.100.1/24 # set interfaces ethernet eth1 address 192.168.100.246/24 </code> ====== システム設定 ====== <code console> # set system gateway-address 10.10.100.5 # set system name-server 8.8.8.8 # set system h

Vyatta PPTP @05_network:04_vyatta

2 ヒット, 最終更新: 12年前

GRE（47番ポート） ====== 環境 ====== |Global側|eth0|10.10.100.1| |Local側|eth1|192.168.1.1| +----------+ ... set vpn pptp remote-access outside-address 10.10.100.1 # set vpn pptp remote-access client-ip-pool sta

07 OpenVswitch ovs

1 ヒット, 最終更新: 3年前

gorithm: balance-slb bond-hash-basis: 0 updelay: 31000 ms downdelay: 200 ms next rebalance: 178216 ms l