差分

このページの2つのバージョン間の差分を表示します。

--- 01_linux:99_その他:37_megacli_smart [2018/12/11 04:13] – 作成 matsui
+++ 01_linux:99_その他:37_megacli_smart [2018/12/11 04:18] (現在) – matsui
@@ 行 1: / 行 1: @@
 ====== 37 MegaCliのSmart情報 ======
+===== MegaCliでDevice ID確認 =====
-{{tag>megacli smart}}
+<code>
+# /opt/MegaRAID/MegaCli/MegaCli64 -PDlist -aAll
+Adapter #0
+Enclosure Device ID: 64
+Slot Number: 0
+Drive's position: DiskGroup: 0, Span: 0, Arm: 0
+Enclosure position: N/A
+Device Id: 2
+WWN: 5000c5007b397b66
+Sequence Number: 2
+Media Error Count: 0
+Other Error Count: 0
+Predictive Failure Count: 0
+Last Predictive Failure Event Seq Number: 0
+PD Type: SATA
+Raw Size: 465.761 GB [0x3a386030 Sectors]
+Non Coerced Size: 465.261 GB [0x3a286030 Sectors]
+Coerced Size: 464.729 GB [0x3a175800 Sectors]
+Sector Size:  0
+Logical Sector Size:  0
+Physical Sector Size:  0
+Firmware state: Online, Spun Up
+Commissioned Spare : No
+Emergency Spare : No
+Device Firmware Level: CC03
+Shield Counter: 0
+Successful diagnostics completion on :  N/A
+SAS Address(0): 0x4433221100000000
+Connected Port Number: 0(path0)
+Inquiry Data:             9XF3MMBMST9500620NS                             CC03
+FDE Capable: Not Capable
+FDE Enable: Disable
+Secured: Unsecured
+Locked: Unlocked
+Needs EKM Attention: No
+Foreign State: None
+Device Speed: 6.0Gb/s
+Link Speed: 6.0Gb/s
+Media Type: Hard Disk Device
+Drive:  Not Certified
+Drive Temperature :26C (78.80 F)
+PI Eligibility:  No
+Drive is formatted for PI information:  No
+PI: No PI
+Port-0 :
+Port status: Active
+Port's Linkspeed: 6.0Gb/s
+Drive has flagged a S.M.A.R.T alert : No
+Enclosure Device ID: 64
+Slot Number: 1
+Drive's position: DiskGroup: 0, Span: 0, Arm: 1
+Enclosure position: N/A
+Device Id: 3
+WWN: 5000c5007b39948b
+Sequence Number: 2
+Media Error Count: 0
+Other Error Count: 0
+Predictive Failure Count: 0
+Last Predictive Failure Event Seq Number: 0
+PD Type: SATA
+Raw Size: 465.761 GB [0x3a386030 Sectors]
+Non Coerced Size: 465.261 GB [0x3a286030 Sectors]
+Coerced Size: 464.729 GB [0x3a175800 Sectors]
+Sector Size:  0
+Logical Sector Size:  0
+Physical Sector Size:  0
+Firmware state: Online, Spun Up
+Commissioned Spare : No
+Emergency Spare : No
+Device Firmware Level: CC03
+Shield Counter: 0
+Successful diagnostics completion on :  N/A
+SAS Address(0): 0x4433221101000000
+Connected Port Number: 1(path0)
+Inquiry Data:             9XF3N5RZST9500620NS                             CC03
+FDE Capable: Not Capable
+FDE Enable: Disable
+Secured: Unsecured
+Locked: Unlocked
+Needs EKM Attention: No
+Foreign State: None
+Device Speed: 6.0Gb/s
+Link Speed: 6.0Gb/s
+Media Type: Hard Disk Device
+Drive:  Not Certified
+Drive Temperature :27C (80.60 F)
+PI Eligibility:  No
+Drive is formatted for PI information:  No
+PI: No PI
+Port-0 :
+Port status: Active
+Port's Linkspeed: 6.0Gb/s
+Drive has flagged a S.M.A.R.T alert : No
+Exit Code: 0x00
+</code>
+===== smartctlで情報取得 =====
+ smartctl -a -d sat+megaraid,[Device ID] /dev/sda
+Device ID: 2のSmart情報を取得する場合は下記
+<code>
+# smartctl -a -d sat+megaraid,2 /dev/sda
+smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.0+2] (local build)
+Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
+=== START OF INFORMATION SECTION ===
+Device Model:     ST9500620NS
+Serial Number:    9XF3MMBM
+LU WWN Device Id: 5 000c50 07b397b66
+Firmware Version: CC03
+User Capacity:    500,107,862,016 bytes [500 GB]
+Sector Size:      512 bytes logical/physical
+Device is:        Not in smartctl database [for details use: -P showall]
+ATA Version is:   8
+ATA Standard is:  ATA-8-ACS revision 4
+Local Time is:    Tue Dec 11 13:16:37 2018 JST
+SMART support is: Available - device has SMART capability.
+SMART support is: Enabled
+=== START OF READ SMART DATA SECTION ===
+SMART overall-health self-assessment test result: PASSED
+Warning: This result is based on an Attribute check.
+General SMART Values:
+Offline data collection status:  (0x82)	Offline data collection activity
+					was completed without error.
+					Auto Offline Data Collection: Enabled.
+Self-test execution status:      (   0)	The previous self-test routine completed
+					without error or no self-test has ever
+					been run.
+Total time to complete Offline
+data collection: 		(  625) seconds.
+Offline data collection
+capabilities: 			 (0x7b) SMART execute Offline immediate.
+					Auto Offline data collection on/off support.
+					Suspend Offline collection upon new
+					command.
+					Offline surface scan supported.
+					Self-test supported.
+					Conveyance Self-test supported.
+					Selective Self-test supported.
+SMART capabilities:            (0x0003)	Saves SMART data before entering
+					power-saving mode.
+					Supports SMART auto save timer.
+Error logging capability:        (0x01)	Error logging supported.
+					General Purpose Logging supported.
+Short self-test routine
+recommended polling time: 	 (   1) minutes.
+Extended self-test routine
+recommended polling time: 	 (  96) minutes.
+Conveyance self-test routine
+recommended polling time: 	 (   2) minutes.
+SCT capabilities: 	       (0x10bd)	SCT Status supported.
+					SCT Error Recovery Control supported.
+					SCT Feature Control supported.
+					SCT Data Table supported.
+SMART Attributes Data Structure revision number: 10
+Vendor Specific SMART Attributes with Thresholds:
+ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
+Raw_Read_Error_Rate     0x000f   076   063   044    Pre-fail  Always       -       49880690
+Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
+Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       7
+Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
+Seek_Error_Rate         0x000f   087   060   030    Pre-fail  Always       -       621005461
+Power_On_Hours          0x0032   067   067   000    Old_age   Always       -       29525
+Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
+Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       7
+End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
+Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
+Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
+High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
+Airflow_Temperature_Cel 0x0022   074   062   045    Old_age   Always       -       26 (Min/Max 26/28)
+G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
+Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       6
+Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       243
+Temperature_Celsius     0x0022   026   040   000    Old_age   Always       -       26 (0 21 0 0)
+Hardware_ECC_Recovered  0x001a   112   099   000    Old_age   Always       -       49880690
+Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
+Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
+UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
+SMART Error Log Version: 1
+No Errors Logged
+SMART Self-test log structure revision number 1
+No self-tests have been logged.  [To run self-tests, use: smartctl -t]
+SMART Selective self-test log data structure revision number 1
+ SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+Selective self-test flags (0x0):
+  After scanning selected spans, do NOT read-scan remainder of disk.
+If Selective self-test is pending on power-up, resume after 0 minute delay.
+</code>
+{{tag>megacli smartctl}}

fl8 Wiki

ユーザ用ツール

サイト用ツール

差分

ページ用ツール